Regrinding The Driver Blade - Hitachi NR 90AD Technical Data And Service Manual
Strip nailer
Hide thumbs
Also See for NR 90AD:
- Instruction and safety manual (68 pages) ,
- Instruction and safety manual (18 pages) ,
- Instruction and safety manual (51 pages)
Table of Contents
Advertisement
9-2. Regrinding the Driver Blade
The tip of the driver blade should be ground as shown in Fig. 10. To grind with a grinder, gradually grind the tip
while cooling the ground area with water to prevent it from being excessively heated. Excessive grinding will
rapidly reduce the service life of the driver blade. In such a case, replace the driver blade.
Driver blade
Concave
5˚
Grinding surface
Fig. 10
--- 17 ---
Hide quick links:
Advertisement
Table of Contents
