Vcr Alignment And Adjustments; Reference; Location Of Adjustment Button Of Remote Control - Sony SLV-D100 Service Manual

QQ
3 7 63 1515 0

6. VCR Alignment and Adjustments

6-1 Reference

1) X-Point (Tracking center) adjustment, "Head switching adjustment" can be adjusted with remote control.
2) When replacing the VCR Main PCB Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the "Head switching adjustment".
3) When replacing the cylinder ass'y, be sure to adjust the "X-Point" and "Head switching adjustment".
4) How to adjustment.
- Monmently short-circuit the test point on Function-Timer PCB with pincers to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.

6-1-1 Location of Adjustment Button of Remote Control

TE
L 13942296513
www
.
http://www.xiaoyu163.com
X-Point (Tracking Center)
Adjustment ; "5"
Head Switching
Adjustment ; "SP/EP"
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Q Q
3 6 7 1 3 1 5
co
.
Fig. 6-1
6-1
9 4 2 8
0 5 8 2 9 9 4 2 8
m
SLV-D100
9 9
9 9