Step 4 Release 2 catches.
Step 5 Lift up to remove Mic P.C.B..
Caution: During assembling, ensure that Mic P.C.B. is
seated properly through the guide & fully catched.
9.15. Disassembly of D-Amp P.C.B.
• Refer to "Disassembly of Top Cabinet".
• Refer to "Disassembly of Front Panel Assembly".
Step 1 Remove 2 screws.
Step 2 Detach 6P Cable Wire at the connector (CN5801) on
SMPS P.C.B..
Step 3 Remove 1 screw.
43