Canon PIXMA MX330 series Getting Started page 5

For other connection methods, refer to the on-
screen manual: Basic Guide.
r
~
To use the machine as a fax, a telephone
line needs to be connected.
This section describes the basic method of
telephone line connection.
Only when connecting a telephone:
Remove the telephone connector cap (8), then
connect a telephone with the telephone line
cable.
Connect the machine with a telephone line using the
supplied telephone line cable (A).
When using as a fax only:
Go to "4 Turn the Power On" on page 4.
Go to "4 Turn
the Power On"
on page 4.
06
_', When not using
as a fax:
1'"
When using as
,
',R",'~",
both a fax and
telephone:
1:,
", When using as
a fax only:
, . Oonly
~---------
• If you cannot send faxes after installing the
machine, check the telephone line type. For
details, refer to "Confirming the Telephone Line
Connection" in the on-screen manual: Basic
Guide.
~----------
• Do not connect the machine and a telephone in parallel
to the same telephone line using a distribution adapter.
The machine may not operate properly.