Removing And Reinstalling The System Stand - Lenovo THINKCENTRE 5068 Hardware Maintenance Manual

6. To reinstall the system stand hinge cover, place the system stand hinge cover on the computer so that
the two plastic tabs on the hinge cover align with the corresponding holes in the computer.
Figure 6. Reinstalling the system stand hinge cover
7. Reinstall the screw to secure the system stand hinge cover to the computer.
Figure 7. Reinstalling the screw to secure the system stand hinge cover to the computer

Removing and reinstalling the system stand

Attention
Do not open your computer or attempt any repair before reading and understanding the "Important safety
information" in the ThinkCentre Edge Safety and Warranty Guide that came with your computer. To obtain a
copy of the ThinkCentre Edge Safety and Warranty Guide, go to:
http://www.lenovo.com/support
90
ThinkCentre Edge Hardware Maintenance Manual