V
SENDING TO MORE THAN ONE LOCATION
(SEQUENTIAL BROADCASTING)
1.
Place documents face down on the fax
2.
Press all the relevant one-touch / coded-dial numbers one right
after another
3.
Should you have one more destination not programmed in the
speed dial, you can now enter the number on the numeric pad.
Otherwise, skip to step No. 4
4.
Press START/COPY
5.
Take note of " TX / RX " number
N.B. Please check on the MULTI TRANSACTION REPORT which
will be generated out after the broadcast is completed to ensure that
the broadcast is successful.
9