Replacing The Cover And Connecting The Cables - Lenovo ThinkCentre 8288 User Manual

8. Move the jumper back to the standard (pins 1 and 2).
9. Replace the computer cover and connect the power cord. See "Replacing the

Replacing the cover and connecting the cables

After working with options, you need to install any removed parts, replace the
computer cover, and reconnect any cables, including telephone lines and power
cords. Also, depending on the option that is installed, you might need to confirm
the updated information in the Setup Utility program.
To replace the computer cover and connect cables to your computer:
1. Ensure that all components have been reassembled correctly and that no tools
2. Clear any cables that might impede the replacement of the computer cover.
3. Position the computer cover on the chassis so that the rail guides on the bottom
4. Install any cover locking devices as necessary.
5. Reconnect the external cables and power cords to the computer. See "Installing
6. To update the configuration, see Chapter 2, "Using the Setup Utility," on page
cover and connecting the cables."
or loose screws are left inside your computer.
of the cover engage the rails and push the cover closed until it latches.
external options" on page 6.
27.
Chapter 1. Installing options
25