4.3.2 Ethernet Port Settings
Default Value
Configuration File Reference
Auto DNS via DHCP
Description
Value Range
Default Value
Configuration File Reference
DNS1
Description
Value Range
Default Value
Configuration File Reference
DNS2
Description
Value Range
Default Value
Configuration File Reference
4.3.2 Ethernet Port Settings
This screen allows you to change the connection mode of the Ethernet ports, LLDP and the VLAN settings.
84
Administrator Guide
Not stored.
STATIC_GATEWAY_IPV6 (Page 188)
Selects whether to enable or disable the DNS server obtained by
DHCPv6.
Note
•
This setting is available only when [Connection Mode] is set
to [DHCP].
•
Yes: Use DNS obtained by DHCPv6
•
No: Not use (use static DNS)
Yes
DHCP_DNS_ENABLE_IPV6 (Page 189)
Specifies the IP address of primary DNS server for IPv6.
Max. 39 characters
n:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available]
Not stored.
USER_DNS1_ADDR_IPV6 (Page 188)
Specifies the IP address of secondary DNS server for IPv6.
Max. 39 characters
n:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available]
Not stored.
USER_DNS2_ADDR_IPV6 (Page 188)
Document Version 2015-02