Bluetooth Error Messages And Measures - Chevrolet Aveo Owner's Manual

142 Infotainment system
■ The sound played by the Bluetooth
device is delivered through the
Infotainment system.
■ For Bluetooth audio to play, the
music must at least be played once
from the music player mode of the
mobile phone or Bluetooth device
after connecting as a stereo
headset. After being played at least
once, the music player will
automatically play upon entering
play mode, and it will automatically
stop when the music player mode
ends. If the mobile phone or
Bluetooth device is not in the
waiting screen mode, some
devices may not automatically play
in Bluetooth audio play mode.
Press the fSEEKe buttons to switch
to the previous or next track, or hold
down these buttons to fast forward or
rewind.
■ This function only operates with
Bluetooth devices that support
AVRCP (Audio Video Remote
Control Profile) version 1.0 or
above. (Depending on the
Bluetooth device options, some
devices may display AVRCP being
connected for the initial
connection.)
■ The information about playing track
and track position will not be
displayed on the Infotainment
system screen.
Cautions for playing Bluetooth audio
■ Do not change the track too quickly
when playing Bluetooth audio.
It takes some time to transmit data
from the mobile phone to the
Infotainment system.
■ The Infotainment system transmits
the order to play from the mobile
phone in the Bluetooth audio play
mode. If this is done in a different
mode, then the device transmits the
order to stop.
Depending on the mobile phone's
options, this order to play/stop may
take some time to activate.
■ If the mobile phone or Bluetooth
device is not in the waiting screen
mode, it may not automatically play
despite being carried out from the
Bluetooth audio play mode.
If Bluetooth audio playback is not
functioning, then check to see if the
mobile phone is in the waiting
screen mode.
■ Sometimes, sounds may be cut off
during the Bluetooth audio
playback. The Infotainment system
outputs the audio from the mobile
phone or Bluetooth device as it is
transmitted.
Bluetooth error messages and
measures
■ Bluetooth deactivated
Check if Bluetooth activation is
setup as on. The Bluetooth function
can be used upon turning on
Bluetooth activation.
■ Bluetooth is busy
Check if there are any Bluetooth
devices connected. To connect
another device, disconnect any
other connected devices first, and
then reconnect.
■ Device list is full
Check if there are less than 5
registered devices. No more than 5
devices can be registered.