Using The Br-Script3 Printer Driver; (Post Script ® 3™ Language Emulation For Macintosh ® ) (Hl-4050Cdn Only); Installing The Br-Script3 Printer Driver - Brother HL-4040CN User Manual

Using the BR-Script3 printer driver

®
(Post Script
(HL-4050CDN only)
Note
• To use the BR-Script3 printer driver on a Network, see the Network User's Guide on the CD-ROM.
• To use the BR-Script3 printer driver, you need to set the Emulation to BR-Script3 by using the control
panel before connecting the interface cable. (See Menu table on page 77.)

Installing the BR-Script3 printer driver

You need to install the BR-Script3 printer driver using the following instructions.
Note
If you use a USB cable, only one printer driver per printer can be registered in the Printer Setup Utility (Print
Center for Mac OS® X 10.2 users). Before installing the BR-Script3 printer driver, delete from the Printer
list any other Brother drivers that are for the same printer.
a
From the Go menu Choose Applications.
b
Open the Utilities folder.
3™ language emulation for Macintosh
Driver and Software
®
)
3
3
3
61