Example: Operating The Tuner - Sony RM-TP503 Operating Instructions Manual

Example: Operating the Tuner

This section describes how to operate the tuner.
For details on tuner operation, please refer to the
operating instructions provided with the receiver/
amplifier.
1
Touch FUNCTION.
The FUNCTION screen appears.
2
Touch .
The receiver/amplifier's function switches to TUNER
and the tuner screen appears. However, preset station,
station name, band, and frequency do not appear in
the display of the amplifier.
Preset station
Band
• Touch FM/AM to change the band.
• Touch FM MODE to switch the FM reception mode to
AUTO or MONO. If the FM stereo reception is poor, select
MONO. You will not be able to enjoy the stereo sound
effect, but the sound will be less distorted.
• Touch PRESET + or – to search for preset stations.
• Touch TUNING + or – to search for stations that can be
received.
• Touch SHIFT to switch memory pages (A, B, C).
• Touch TUNING MODE to switch the tuning mode to
AUTO or MANUAL.
• During display of any of the screens, touching FUNCTION
returns to the FUNCTION screen.
z
When broadcast stations or frequencies are not displayed
properly
Point the commander at the receiver/amplifier and touch
RELOAD.
GB
14
Station name
Frequency
To operate other functions
Touch SUB or use the JOG DIAL to scroll to display the
icons used for memorizing broadcast stations and station
names.
• To receive manually, touch DIRECT and input the
frequency.
• When memorizing a received broadcast station, memorize
after touching MEMORY.
Viewing the LIST
Touch LIST to view the names of the broadcast stations
downloaded from the receiver/amplifier (see page 25 for
details).
The LIST screen can only be displayed when the
FUNCTION is set to TUNER.