Kyocera Mita FS-C8008N Installation Manual page 2

2002, 2003 by KYOCERA MITA CORPORATION All rights reserved. 2-28, 1-Chome, Tamatsukuri, Chuo-ku, Osaka 540-8585, Japan
Installing the Fuser Unit, Secondary Transfer Unit, and Waste Toner Box
Open the paper guide. Insert the fuser unit
15
onto the paper transfer unit.
Fuser Unit
Paper Guide
Install the secondary transfer unit.
19
Secondary
Transfer Unit
Inserting the Developer Units
Unscrew the four screws. Free the two
23
stoppers.
Set the black developer facing the
27
developing roller towards you.
Close the process frame and then close
31
the stoppers. Fix the two (A) screws first,
and then fix the two (B) screws.
Installing the Toner Containers
Shake each toner container well
35
before use. Install the four toner
containers into their corresponding
developer units.
Black
Yellow
Magenta
Cyan
16 Fix the fuser unit with one screw.
Anchor the secondary transfer unit to the
20
printer using the included anchor jig and
screw.
Secondary Transfer
Unit Anchor Jig
24 Pull out the process frame.
28 Set the cyan developer.
Developing
Roller
32
Pull out the paper transfer unit.
Close the front cover.
36
Open the fuser top cover.
17
Fuser
Top Cover
Install the waste toner box.
21
Waste Toner Box
Remove the 2 tags and then both the
25
front and rear stoppers.
Process Frame
Tag
Tag
29 Set the magenta developer.
Reinstall the primary transfer unit. Insert
33
it thoroughly on the rails.
Making Connections
Connect to the computer.
37
For more information about the printer, refer to the Operation Guide (PDF) in the CD-ROM supplied with the printer.
Firmly tighten two screws. Close the fuser
18
top cover, then close the paper guide.
22
Close the paper transfer unit.
Peel off the tapes from the developer units
26
and remove the protective pad from each
unit.
Rear stopper
Black
Front
stopper
30 Set the yellow developer.
Close the lock lever. Fix the screw.
34
Reinsert the paper transfer unit.
Connect the power cord to the
38
power outlet. Turn on the printer
power switch.
USB Interface
Network Interface
(Ethernet)
Parallel Interface
Printed in Japan 2003.1EC 2CK80011B
Cyan
Magenta
Yellow