Telnet; Ssh (Secure Shell); How To Find Commands In This Guide - ZyXEL Communications ZYWALL USG Series Reference Manual

1.2.3 Telnet

Use the following steps to Telnet into your ZyWALL / USG.
If your computer is connected to the ZyWALL / USG over the Internet, skip to the next step. Make
1
sure your computer IP address and the ZyWALL / USG IP address are on the same subnet.
In Windows, click Start (usually in the bottom left corner) and Run. Then type
2
ZyWALL / USG's IP address. For example, enter
IP address).
Click OK. A login screen displays. Enter the user name and password at the prompts.
3
Note: The default login username is admin and password is 1234. The username and
password are case-sensitive.

1.2.4 SSH (Secure SHell)

You can use an SSH client program to access the CLI. The following figure shows an example using
a text-based SSH client program. Refer to the documentation that comes with your SSH program
for information on using it.
Note: The default login username is admin and password is 1234. The username and
password are case-sensitive.
Figure 8 SSH Login Example
C:\>ssh2 admin@192.168.1.1
Host key not found from database.
Key fingerprint:
xolor-takel-fipef-zevit-visom-gydog-vetan-bisol-lysob-cuvun-muxex
You can get a public key's fingerprint by running
% ssh-keygen -F publickey.pub
on the keyfile.
Are you sure you want to continue connecting (yes/no)? yes
Host key saved to C:/Documents and Settings/user/Application Data/SSH/hostkeys/
ey_22_192.168.1.1.pub
host key for 192.168.1.1, accepted by user Tue Aug 09 2005 07:38:28
admin's password:
Authentication successful.

1.3 How to Find Commands in this Guide

You can simply look for the feature chapter to find commands. In addition, you can use the
Commands (Alphabetical)
order that they appear in this guide.
If you are looking at the CLI Reference Guide electronically, you might have additional options (for
example, bookmarks or Find...) as well.
ZyWALL / USG (ZLD) CLI Reference Guide
telnet 192.168.1.1
at the end of the guide. This section lists the commands in alphabetical
Chapter 1 Command Line Interface
and the
telnet
(the default management
List of
25