Ddns Commands Summary - ZyXEL Communications ZYWALL USG Series Reference Manual

Chapter 18 DDNS

18.2 DDNS Commands Summary

The following table describes the values required for many DDNS commands. Other values are
discussed with the corresponding commands.
Table 73 Input Values for DDNS Commands
LABEL
profile_name
The following table lists the DDNS commands.
Table 74 ip ddns Commands
COMMAND
show ddns [profile_name]
show ddns-status
[no] ip ddns profile profile_name
[no]https activate
[no] service-type {dyndns | dyndns_static |
dyndns_custom | dynu-basic | dynu-premium |
no-ip | peanut-hull | 3322-dyn | 3322-static |
Selfhost | User custom}
[no] username username password password
[no] host hostname
[no] ip-select {iface | auto | custom}
[no] ip-select-backup {iface | auto | custom}
[no] custom ip
[no] backup-custom ip
138
DESCRIPTION
The name of the DDNS profile. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive.
DESCRIPTION
Displays information about the specified DDNS profile or
about all DDNS profiles.
Shows which DDNS profiles are active, inactive or have failed.
Creates or edits the specified DDNS profile and enters sub-
command mode if necessary. The
profile.
Encrypts traffic using SSL (port 443) to the DDNS server. Not
all DDNS providers support this option. The
disables HTTPS.
Sets the service type in the specified DDNS profile. The
command clears it.
Sets the username and password in the specified DDNS
profile. The command clears these fields.
no
username: You can use up to 31 alphanumeric characters and
the underscore (_).
password: You can use up to 64 alphanumeric characters and
the underscore (_).
Sets the domain name in the specified DDNS profile. The
command clears the domain name.
hostname: You may up to 254 alphanumeric characters,
dashes (-), or periods (.), but the first character must be
alphanumeric.
Sets the IP address update policy in the specified DDNS
profile. The command clears the policy.
no
Sets the alternate IP address update policy in the specified
DDNS profile. The command clears the policy.
no
Sets the static IP address in the specified DDNS profile. The
command clears it.
no
Sets the static IP address for the backup interface in the
specified DDNS profile. The
ZyWALL / USG (ZLD) CLI Reference Guide
command deletes this
no
command
no
command clears it.
no
no
no