Entering Vsa Contact Information; Completing Vsa Deployment; Os Information Required For Customized Installations - HP ProLiant Gen9 Servers User Manual

Entering VSA contact information

You must provide all required contact information to deploy HP StoreVirtual VSA. If you do not
wish to provide contact information, it will be necessary to select Continue without deploying VSA.
NOTE: The collected contact data is managed according to the HP privacy statement, available
at http://www.hp.com/go/privacy. You may be contacted by HP.
1. Enter the appropriate contact information. All required fields must be entered.
The contact information is validated and if any fields are not valid you are prompted to enter
them.
2. If you want to receive new product information, select the Sign me up... option.
3. Click the Continue right arrow.

Completing VSA deployment

Before you can begin using VSA you must perform the following tasks. The VSA instructional videos
at the HP website
1. Select the appropriate HP StoreVirtual Centralized Management Console, download and
install it
2. Retrieve your free 1 TB license key and activate it.
3. Configure the Centralized Management Console.
If you do not want to deploy VSA, you can do so at a later time.

OS information required for customized installations

If you selected a Windows-based OS and a Customized installation method on the OS Selection
screen ("Step 2: OS Selection" (page
operating installation and monitoring management protocol information.
Microsoft Windows configuration information for a customized installation
Depending on the type of Microsoft OS you are installing, you may be prompted to enter the
following information:
http://www.hp.com/go/vsa1TB
23)), additional screens are displayed for you to enter custom
will guide you through these tasks.
Step 3: OS Information 29