Using Ilo Configuration Utility; Viewing Ilo Summary Information - HP ProLiant Gen9 Servers User Manual

NOTE: Not all of the options in this table are adjustable on all servers. However, even if you do
not have the option of adjusting some of these settings, they will default to the values shown here.
Power management options
HP Power Profile
HP Power Regulator
Intel QPI Link Power
Management
Minimum Processor Idle
Power Core State
Minimum Processor Idle
Power Package State
Energy/Performance Bias
Maximum Memory Bus
Frequency
Channel Interleaving
Maximum PCI Express
Speed
Intel QPI Frequency

Using iLO Configuration Utility

Use the iLO Configuration Utility to view and change iLO settings through Intelligent Provisioning,
instead of through the iLO web interface. For more information about iLO, see the HP iLO 4 User
Guide.
You must configure iLO network settings to register the server with the HP Insight Remote Support
registration process.
When changing iLO settings, if the display is not as expected or an undefined error message is
displayed, press F5 to refresh the screen display. It is possible that the change was being made
at the same time through the iLO web interface.
To use iLO Configuration Utility:
1. On the Intelligent Provisioning home screen, click Perform Maintenance.
2. Select iLO Configuration from the maintenance options.
The iLO Configuration Utility window is displayed.

Viewing iLO summary information

To view iLO summary information:
Quick Configs settings (Intel-based servers)
Balanced power and
performance
Balanced Power and
Performance
HP Dynamic Power Savings
Mode
Enabled
C6 State
Package C6 (retention) State
Balanced Performance
Auto
Enabled
Maximum Supported
Auto
Minimum power usage
Minimum Power Usage
HP Static Low Power Mode
Enabled
C6 State
Package C6 (retention) State
Power Savings Mode
1333 MHz
Disabled
PCIe Generation 1
Minimum QPI Speed
Using iLO Configuration Utility
Maximum performance
Maximum Performance
HP Static High Performance
Mode
Disabled
No C-states
No Package State
Maximum Performance
Auto
Enabled
Maximum Supported
Auto
49