Table of Contents
Advertisement
Quick Links
CB775-english99.7.55:9PM˘ ` i
Edition 1
This publication could contain technical inaccuracies or typographical
errors. Changes are made periodically to the information herein, these
changes will be made in later editions. IBM may make improvements
and/or changes in the product(s) and/or programs(s) at any time.
It is possible that this publication may contain reference to, or
information about, IBM products (machines and programs),
programming, or services that are not announced in your country.
Requests for copies of this publication and for technical information
about IBM products should be made to your IBM Authorized Dealer or
IBM Retailer.
No part of this publication may be reproduced or distributed in any
form or by any means without prior permission in writing from the
International Business Machines Corporation.
References in this publication to IBM products, programs, or services
do not imply that IBM intends to make these available in all countries
in which IBM operates. Any reference to an IBM product, program or
service is not intended to state or imply that only IBM's product,
program, or service may be used. Any functionally equivalent product,
program, or service that does not infringe any of IBM's intellectual
property rights or other legally protectable rights may be used instead
of the IBM product, program, or service. Evaluation and verification of
operation in conjunction with other products, programs, or services,
except those expressly designated by IBM, are the user 's
responsibility.
IBM may have patents or pending patent applications covering subject
matter in this document. The furnishing of this document does not give
you any license to these patents
Trademarks
The following terms, used in this publication, are trademarks or service
marks of the IBM Corporation in the United States or other countries:
ENERGY STAR is a U.S. registered mark.
© Copyright International Business Machines Corporation 1999
All rights reserved.
i
Advertisement
Table of Contents
Related Manuals for IBM 04N7324
Summary of Contents for IBM 04N7324
- Page 1 CB775-english99.7.55:9PM˘ ` i Edition 1 This publication could contain technical inaccuracies or typographical errors. Changes are made periodically to the information herein, these changes will be made in later editions. IBM may make improvements and/or changes in the product(s) and/or programs(s) at any time. It is possible that this publication may contain reference to, or information about, IBM products (machines and programs), programming, or services that are not announced in your country.
-
Page 2: Packing List
CB775-english99.7.55:9PM˘ ` i i Packing List The product package should include the following items: 1. Monitor 2. Owner’s Manual 3. Power Cord 4. Swivel Base 5. Diskette... -
Page 3: Table Of Contents
CB775-english99.7.55:9PM˘ ` i i i Table of Contents Introduction Features...A1 Precautions Workplace preparation...A2 Working Practices ...A3 Tilt/Swivel Base Installation...A5 Connecting the Monitor Location and Function of Controls Front View Rear View ...A7 Control Panel Function Front Panel Controls ...A8 OSD Button...A8 Buttons...A8 SET Button...A8 Power Button ...A8... -
Page 4: Features
CB775-english99.7.55:9PM˘ ` A1 Introduction Thank you for purchasing a high resolution monitor. It will give you high resolution performance and convenient reliable operation in a variety of video operating modes. Features The monitor is a 15 inches (13.8 inches viewable ) intelligent, microprocessor based monitor compatible with most analog RGB (Red, Green, Blue) display standards, including IBM PC Apple... -
Page 5: Precautions
CB775-english99.7.55:9PM˘ ` A2 Precautions Danger To avoid shock hazard: • Do not remove the covers. • Do not operate this product unless the stand is attached. • Do not connect or disconnect this product during an electrical storm. • The power cord plug must be connected to a properly wired and grounded power outlet. -
Page 6: Working Practices
CB775-english99.7.55:9PM˘ ` A3 Working Practices Rest Take regular breaks. Vary your posture, and stand up and stretch occasionally as prolonged use of computer workstations can be tiring. Back You should sit back in the chair and use the back rest. Hands Use a light touch on the keyboard, keeping your hands and fingers relaxed. - Page 7 CB775-english99.7.55:9PM˘ ` A4 Power Source: 1. Make sure the power cord is the correct type that required in your area. 2. This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area ( No user adjustment is required.
-
Page 8: Tilt/Swivel Base
CB775-english99.7.55:9PM˘ ` A5 Tilt/Swivel Base Turn Off the equipment and all attached options. Carefully set the monitor face-down with the underside facing you. Installation 1. Align the hooks on the tilt/swivel stand with the matching slots in the base of the monitor. 2. -
Page 9: Connecting The Monitor
CB775-english99.7.55:9PM˘ ` A6 Connecting the Monitor On the back of the monitor are two plug-in connections; one for the AC power cord, and the other for the signal cable from the video card. Power off both the monitor and PC. Connect the 15 pin VGA connector of the supplied signal cable to the output VGA video connector on the PC and the matching input connector on the rear of the monitor. -
Page 10: Location And Function Of Controls
CB775-english99.7.55:9PM˘ ` A7 Location and Function of Controls Location and Function of Controls Front View Rear View AC Power Socket OSD Button Power Button Power Indicator Digital Control Panel ID Label D-Sub Signal Cable... -
Page 11: Control Panel Function Front Panel Controls
CB775-english99.7.55:9PM˘ ` A8 Control Panel Function Front Panel Controls OSD Button Control OSD Button Buttons SET Button Power Button Power Indicator SET Button Power Indicator Buttons Power Button Function Use this button to enter or exit the on screen display . Use these buttons to choose or adjust items in the on screen display. -
Page 12: On Screen Display (Osd) Control Adjustment
CB775-english99.7.55:9PM˘ ` A9 On Screen Display (OSD) Control Adjustment Making adjustments to the image size, position and operating parameters of the monitor are quick and easy with the On Screen Display Control system, using only the Enter button and Adjustment Control buttons. -
Page 13: On Screen Display(Osd) Selection And Adjustment
CB775-english99.7.55:9PM˘ ` A10 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selection and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the items that are shown on the Menu. OSD Adjust BRIGHTNESS CONTRAST COLOR... - Page 14 CB775-english99.7.55:9PM˘ ` A11 OSD Adjust SIZE SHAPE SETUP VIDEO LEVEL LANGUAGE OSD POSITION Description Vertical Size To adjust image height. Horizontal Size To adjust image width. Side Pincushion To correct the bowing in and out of the image. Side pincushion balance To correct the balance of both sides bowling.
- Page 15 CB775-english99.7.55:9PM˘ ` A12 OSD Adjust SPECIAL DEGAUSS RECALL MOIRE 54.4kHz/60.0Hz USER MODE Description DEGAUSS To manually demagnetize the screen which may show some image or color incorrectly. H: 0/V: 0 RECALL If the monitor is operating in a factory preset mode, this control will reset the image to the factory preset mode.
-
Page 16: Video Memory Modes
CB775-english99.7.55:9PM˘ ` A13 Video Memory Modes The monitor has 31 memory locations for display modes, 6 of which are factory preset to popular video modes. Display Modes (Resolution) Display Modes (Resolution) IND. 640 x 480 VESA 640 x 480 VESA 800 x 600 VESA 800 x 600... -
Page 17: Energy Saving Design
CB775-english99.7.55:9PM˘ ` A14 Energy Saving Design This monitor complies with the EPA's Energy Star program, which is a program designed to have manufacturers of computer equipment build circuitry into their products to reduce power consumption during time of non-use. This monitor also goes into its energy saving mode if you exceed the monitor's operating limits, such as the maximum resolution of 1024 x 768 or the frequency refresh rates of 30-70kHz horizontal or 50-160Hz vertical. -
Page 18: Low Radiation Compliance (Mpr Ii)
CB775-english99.7.55:9PM˘ ` A15 Low Radiation Compliance (MPR II) This monitor meets one of the strictest guidelines available today for low radiation emissions, offering the user extra shielding and an antistatic screen coating. These guidelines, set forth by a government agency in Sweden, limit the amount of emission allowed in the Extremely Low Frequency (ELF) and Very Low Frequency (VLF) electromagnetic range. -
Page 19: Troubleshooting
CB775-english99.7.55:9PM˘ ` A16 Troubleshooting Self diagnostics message. The signal cable is not connected. OUT OF FREQUENCY message appears. The frequency of the sync input is outside the operating range of the monitor. *Horizontal Frequency: 30-70kHz *Vertical Frequency: 50-160Hz Use the graphics board's utility software to change the frequency setting (Refer to the manual for graphics board). -
Page 20: Further Help
CB775-english99.7.55:9PM˘ ` A17 Further help If you are unable to correct the problem yourself, you may seek further help as follows: Call IBM HELPCENTER. In the US call 1-800-772-2227 In Canada call 1-800-565-3344 In other countries, contact your dealer, retailer, or other IBM authorized servicer. -
Page 21: Service
CB775-english99.7.55:9PM˘ ` A18 Service Unplug the monitor from the wall outlet and refer servicing to qualified service personnel when : The power cord or plug is damaged or frayed. Liquid has been spilled into the monitor. The monitor has been exposed to rain or water. The monitor does not operate normally following the operating instructions. -
Page 22: Specifications
CB775-english99.7.55:9PM˘ ` A19 Specifications Sync Signal type Type Separate sync Signal Connector Pin Assignment H. sync H. sync Separate Sync Green Blue Ground Self-T est Red Ground Green Ground Blue Ground Ground Ground Horiz.Sync ert.Sync V. sync V. sync... - Page 23 CB775-english99.7.55:9PM˘ ` A20 Specifications Picture tube 15 inches (13.8 inches viewable) FST, 90˚ deflection 0.28 mm dot pitch, Non-glare, Darkface AR-ASC (Anti-Reflective Anti-Static Coating) Sync Input Horizontal Frequency : 30 - 70kHz (Automatic) Vertical Frequency Input Form Signal input Video Input Input Form Resolution Power Input...
-
Page 24: Compliances
CB775-english99.7.55:9PM˘ ` A21 Compliances Federal Communications Commission(FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 25 CB775-english99.7.55:9PM˘ ` A22 Power Cord: For your safety, IBM provides a power cord with a grounded attachment plug to use with this IBM product. To avoid electrical shock, always use the power cord and plug with a properly grounded power outlet. IBM power cords used in the United States and Canada are listed by the Underwriters Laboratories (UL) and certified by the Canadian Standards Association (CSA).
- Page 26 Service Information The following parts are for use by IBM service, or IBM authorized dealers, to support customer warranty. Parts are for service use only. Part Number 04N7324 Model Type 2278 M/T-Model Description 2278-06E...
-
Page 27: Warranty
CB775-english99.7.55:9PM˘ ` A24 Warranty Statement of Limited Warranty The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you originally purchase for your use, and not for resale, from IBM or your reseller. The term “Machine” means an IBM machine, its features, conversions, upgrades, elements, or accessories, or any combination of them. - Page 28 CB775-english99.7.55:9PM˘ ` A25 When a type of service involves the exchange of a Machine or part, the item IBM or your reseller replaces becomes its property and the replacement becomes yours. You represent that all removed items are genuine and unaltered. The replacement may not be new, but will be in good working order and at least functionally equivalent to the item replaced.