Lenovo THINKCENTRE 6393 Hardware Maintenance Manual page 63

Lenovo computer hardware user manual
Hide thumbs Also See for THINKCENTRE 6393:
Table of Contents

Advertisement

Diagnostic Error Code
170-197-XXX Voltage Sensor(s) test warning
170-198-XXX Voltage Sensor(s) test aborted
170-199-XXX Voltage Sensor(s) test failed, cause
unknown
170-250-XXX 170-251-XXX Voltage Sensor(s) Voltage
limit error
170-254-XXX Voltage Sensor(s) Voltage Regulator
Module error
175-000-XXX Thermal Sensor(s) Test Passed
175-0XX-XXX Thermal Sensor(s) failure
175-195-XXX Thermal Sensor(s) Test aborted by user
175-196-XXX Thermal Sensor(s) test halt, error threshold
exceeded
175-197-XXX Thermal Sensor(s) test warning
175-198-XXX Thermal Sensor(s) test aborted
FRU/Action
1. Make sure the component that is called out
is connected and/or enabled. See Chapter 6
"Diagnostics, Test and Recovery Information" on
page 39
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6
"Diagnostics, Test and Recovery Information" on
page 39
2. Flash the system and re-test. See "Updating (flashing)
BIOS from a CD-ROM or diskette" on page 139
3. Go to "Undetermined problems" on page 62
1. See "Undetermined problems" on page 62
2. Flash the system and re-test. See "Updating (flashing)
BIOS from a CD-ROM or diskette" on page 139
3. Replace component under function test
1. AC/DC power adapter
2. System board
1. Voltage Regulator Module (VRM)
2. Microprocessor
3. System board
No action
1. Flash system
2. System board
Information only Re-start the test, if necessary
1. Press F3 to review the log file
2. Re-start the test to reset the log file
1. Make sure the component that is called out
is connected and/or enabled. See Chapter 6
"Diagnostics, Test and Recovery Information" on
page 39
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
1. If a component is called out, make sure it is
connected and/or enabled
2. Flash the system and re-test. See "Updating (flashing)
BIOS from a CD-ROM or diskette" on page 139
3. Go to "Undetermined problems" on page 62
Chapter 7
.
Symptom-to-FRU Index
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents