Table of Contents
Advertisement
Figure 22. Accessing the microprocessor
6. Lift the microprocessor straight up and out of the microprocessor socket.
Notes:
a. Your microprocessor and socket might look different from the one illustrated.
b. Note the orientation of the microprocessor in the socket. You can either look for the small triangle
on one corner of the microprocessor or note the orientation of the notches
This is important when installing the new microprocessor on the system board.
c. Touch only the sides of the microprocessor. Do not touch the gold contacts on the bottom.
d. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be
kept as clean as possible.
80
Hardware Maintenance Manual
1
2
on the microprocessor.
Advertisement
Table of Contents
