Setup Windows; Property Window - Sony DWR-R02D User Manual

Setup Windows

Wireless Studio includes the following setup windows:

• Property window

• Channel Plan Adviser window
• Omit IP address list window
• Setting lock window
• Receiver CH Label setting window
• AF peak hold setting window
• Startup setting window
• Region setting window
Property Window
This window allows you to view and change settings for
receivers and their paired transmitters.
a Unlock Settings/Lock Settings button
When setting modification is disabled due to the Setting
lock function, click this button and enter the password to
temporarily enable setting modification.
Close the Property window or click the button again to
relock settings.
For details on the Setting lock function, see "Setting lock
Window" on page 35.
28
Setup Windows
b Meter icons
These function identically to the meter icons in the status
viewer.
c Property tabs
These consist of the Utility tab and tabs for channels 1 and
2.
For details on the setting items in each tab, see "Utility
tab" on page 28 and "Channel tabs 1/2" on page 29.
d Close button
Closes the Property window.
Utility tab
Displays setting items that are equivalent to those in the
UTILITY menu of the receiver.
For details on each setting item, refer to the Operating
Instructions supplied with the receiver.
1
2
3
Receiver Type: In online mode, this displays the device
information acquired from the receiver and cannot be
changed. The device information can be changed in offline
mode.
Receiver Model: In online mode, this displays the
frequency band acquired from the receiver and cannot be
changed. The frequency band can be changed in offline
4
mode. Specify a frequency band that corresponds to the
actual device.
Receiver Name: Sets a name for the receiver.
Band: Selects the frequency band to use.
ANT ATT: Sets the attenuator for the receiver's antenna
input.
ANT DC Output: Sets the DC power supply for the
antennas connected to the receiver's ANTENNA a/b IN
connectors.
Sync Source: Sets the sync signal source for the receiver.
Delay Adjust: Selects whether to correct differences in
audio delay time that may occur between receiver channels
1 and 2.
Alert function setting: Specifies the conditions under
which to light the ALERT indicator on the receiver. You