Section 5 - Connecting to a Wireless Network
It is recommended that you enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an
existing network, you will need to know the WPA key being used.
1.. Open the Windows
XP Wireless Utility by right-clicking on the
®
wireless computer icon in your system tray
(lower-right corner of screen). Select View.Available.Wireless.
Networks.
2.. Highlight the wireless network (SSID) you would like to connect to
and click Connect.
D-Link DWR-710 User Manual
Configure WPA-PSK
42