Using Windows Xp - D-Link Mini 3G 21 Mbps User Manual

Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network

Using Windows XP

Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are
®
using another company's utility or Windows 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless
®
network. Most utilities will have a "site survey" option similar to the Windows XP utility as seen below.
®
If you receive the Wireless.Networks.Detected bubble, click on the center of the
bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lower-right corner
next to the time). Select View.Available.Wireless.Networks.
The utility will display any available wireless networks in your area. Click on a
network (displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check the TCP/IP settings
for your wireless adapter. Refer to the Networking.Basics section in this manual
for more information.
D-Link DWR-710 User Manual 39