Main (center) stand
Electro-hydraulic center-stand system EHCS
3
N
70
Y our motorcycle has an electro-hydraulic center stand, EHCS for
short, that makes it easy to park the motorcycle on its main stand.
Indicators and indicator lights of the EHCS
Indicator light Indicator in
Flashes at 2 Hz
ON
Flashes at 4 Hz Lightning flash
Flashes at 4 Hz Hourglass
Flashes at 4 Hz Call symbol
Meaning
the multifunc-
tion display
EHCS active
EHCS at limit position
EHCS system failure
– On-board system voltage is below 10 V
– Control unit or its periphery defective
EHCS system overload
– After it has been in operation for
– If the EHCS is used more than three times
Operator error
– Side stand extended
– Gear engaged
– Handbrake/footbrake applied
– Motorcycle not at a standstill
(
90)
b
10 seconds, the EHCS is disabled for
10 seconds.
in succession for 10 seconds, it is disabled
for 3 minutes (you can cancel this disabled
period by switching the ignition on and
then off again).
(
90)
b