Distance Recorder - BMW K 1200 LT Owner's Manual

Distance recorder

1
26
N
D istance recorder 2 appears only
when the ignition key is in the ON
position.
Each time you switch on the
ignition the odometer reading
showing the total distance the
motorcycle has covered appears
for 10 seconds, before the display
switches to the mode selected
before the ignition was switched
off.
W
D o not attempt to check/set the
distance recorder unless the
motorcycle is at a standstill
– Risk of accident.
2
1
• Ignition key ON
• Press button 1 for less than
2 seconds; each time you press
the button the display steps to
the next reading in the following
sequence:
– Odometer reading (total dis-
tance covered)
– Tripmeter 1 reading
– Press button 1 for longer than
2 seconds if you want to reset
this reading.
– Tripmeter 2 reading
– Press button 1 for longer than
2 seconds if you want to reset
this reading.