Angled Wall Radiation Shield - Lennox Hearth Products Montecito MONTE Installation And Operation Instructions Manual

ANGLED WALL RADIATION SHIELD

(RSM+ and RSMI30)
When traversing a combustible wall with the chimney at a 30º or 45º
angle, an angled firestop or wall radiation shield must be installed. Only
one is required.
Note: 45º angle for Canada only (
In cold climate locations (climates where temperatures will fall below 32°
F / 0° C), we recommend that you use the insulated wall radiation shield
since it will maintain the home's thermal barrier.
Chimney Model
ASHT+ / HT6103+
(6" dia). Canada only
S-2100+ / HT6000+ /
AC (6" dia).
Table 5
18
RSMI45)
RSM+ and RSMI30
(RSMI45 - Canada Only)
Angle Hole Size
30º 283 mm x 781 mm (11-1/8" x 30-3/4")
45º 283 mm x 518 mm (11-1/8" x 20-3/8")
30º 327 mm x 881 mm (12-7/8" x 34-11/16")
30º 380 mm x 972 mm (15" x 38-1/4")
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Insulated Wall
Drywall
Figure 29
Insulated Wall
Radiation Shield