Maintenance Schedule - Lennox Hearth Products Shoreline 33/40 DV INS Installation And Operation Manual

MAINTENANCE SCHEDULE

ANNUALLY (Before the onset of the Burning Season)
MAINTENANCE TASK
Inspecting/Cleaning Burner, Logs
and Controls
Check Flame Patterns and Flame
Height
Inspecting/Cleaning Pilot
Checking Vent System
Appliance Checkout
Replacing Rockwool Ember Materials
PERIODICALLY (After the Burning Season)
MAINTENANCE TASK
Cleaning Firebox Interior
Check Flame Patterns and Flame
Height
Checking Vent System
Cleaning Front Door Window
ACCOMPLISHING PERSON
Qualified Service Technician
Qualified Service Technician
Qualified Service Technician
Qualified Service Technician
Qualified Service Technician
Homeowner/Qualified Service
Technician
ACCOMPLISHING PERSON
Homeowner
Homeowner
Homeowner
Homeowner
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE
PROCEDURE
Inspect valve and ensure it is properly operating. Check piping
for leaks. Vacuum the control compartment, fireplace logs and
burner area.
Refer to Figures 33 and 34 on Page 20 and verify the flame
pattern and height displayed by the appliance conforms to the
picture. Flames must not impinge on the logs.
Refer to Figure 39 on Page 23. Remove any surface build-up
on pilot assembly. Wipe the pilot nozzles, igniter electrode
and hood. Ensure the pilot flame engulfs the thermopile and
thermocouple as shown.
Inspect the vent system at the top and at the base (within the
firebox) for signs of blockage or obstruction. Look for any signs
of dislocation of the vent components.
Perform the appropriate appliance checkout procedure detailed
in this manual.
Remove old ember materials and vacuum the ember (rock-
wool) placement area. Place new rockwool as described on
Page 15.
PROCEDURE
Carefully remove logs, rockwool and lava rock. Vacuum out
interior of the firebox. Clean firebox walls and log grate. Replace
logs, rockwool and lava rock as detailed in this manual.
Refer to Figures 33 and 34 on Page 20 and verify the flame
pattern and height displayed by the appliance conforms to the
picture. Flames must not impinge on the logs.
Inspect the vent system at the top and at the base (within the
firebox) for signs of blockage or obstruction. Look for any signs
of dislocation of the vent components.
Clean as necessary following the directions provided in this
manual. DO NOT TOUCH OR ATTEMPT TO CLEAN GLASS WHILE
HOT.
5