Surround Installation Instructions - Lennox Hearth Products Shoreline 33/40 DV INS Installation And Operation Manual

SHORELINE™ SURROUND ASSEMBLY INSTALLATION
Tools Needed: No tools are needed
One of the following surround kits is required (Purchased sepa-
rately).
Models SHR33 & SHR40
Part/Cat. #
75387 Small 3-sided Flange
75385 Small 4-sided Flange
75388 Large 3-sided Flange
75386 Large 4-sided Flange
Table 9
Note: Install surround with insert positioned in the fireplace, but a
few inches in front of its final location.
Figure 27
To Install Surround Panels:
1. Hang the surround on hooks attached to insert (labeled A and B).
Make sure the surround is seated firmly on the hooks. See Figures
28 and 29.
Figure 28
16
Surround Kits
Description Dimensions
36-5/8"W x 25-7/8"H
36-5/8"W x 29-3/16"H
41"W x 28"H
41"W x 33-1/2"H
Hook A
Hook B
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE
Hook A
Figure 29
2 Slide the insert into its final location in the fireplace. In case of uneven
wall surface open the right surround access door and make any
adjustments needed to ensure there is enough clearance to open the
access door (see Page 17).
Figure 30
Important Note: The trim panels or surrounds must not seal ventilation
openings on the appliance.