Manually Feeding Paper - Epson AcuLaser C4000 Owner's Manual

Note:
If you make paper size settings or paper source settings in your
application, these settings may override the printer driver settings.
When you select an envelope for the Paper Size setting, it can be fed
only from the MP tray regardless of the Paper Source setting.
You can change the priority of the MP tray by using the MP Mode
setting in the control panel's Setup Menu. For details, see "Setup
Menu" on page 187.
With optional Large Capacity Paper Unit installed:
MP tray
Lower Cassette 1 (standard lower cassette)
Lower Cassette 2 (optional lower cassette)
Lower Cassette 3 (optional lower cassette)
Note:
If you make paper size settings or paper source settings in your
application, these settings may override the printer driver settings.
When you select an envelope for the Paper Size setting, it can be fed
only from the MP tray regardless of the Paper Source setting.
You can change the priority of the MP tray by using the MP Mode
setting in the control panel's Setup Menu. For details, see "Setup
Menu" on page 187.

Manually feeding paper

Manual feeding is similar to normal paper feeding, except that
you need to press the N Start/Stop button to print the rest of the
pages after the first page is printed. This can be helpful when you
want to check the print quality after the first page is printed.
Follow these steps to feed paper manually.
1. Access the printer driver by one of the following methods:
26
Paper Handling