Problems And Solutions; Operational Problems - Epson AcuLaser C4000 Owner's Manual

Problems and Solutions

You can solve most printer problems with the help of this guide.
Look through this section to find the kind of problem you have,
then try the recommended solutions in the order they are
presented until your problem is solved.
Note:
If the problem persists after you work through the suggestions in this
section, contact your dealer for assistance.

Operational problems

The Ready light does not turn on when you turn the printer on
Cause
The power cord may not be
properly plugged into the
electrical outlet.
The electrical outlet may be
controlled by an outside
switch or an automatic timer.
The printer does not print and the Ready light is off
Cause
The printer is offline.
306
Troubleshooting
What to do
Turn off the printer and check the
power cord connections between the
printer and the electrical outlet. Then
turn the printer back on.
Make sure that the switch is turned on
or plug another electrical device into the
outlet to check whether the outlet is
operating properly.
What to do
Press the N Start/Stop button once to
switch the printer to ready status.