Clearing Jammed Paper; Precautions For Clearing Jammed Paper; Troubleshooting - Epson AcuLaser C4000 Owner's Manual

Clearing Jammed Paper

When paper is jammed in the printer, the printer's LCD panel and
EPSON Status Monitor 3 display alert messages indicating the
location of the jam.
Read the general precautions below, then find the title in this
section that corresponds to the alert message on your LCD panel
and follow the instructions to clear the jammed paper.

Precautions for clearing jammed paper

Be sure to observe the following points when you clear jammed
paper:
Do not forcibly remove jammed paper. Torn paper can be
difficult to remove and might cause other paper jams. Pull it
gently in order to avoid tearing.
Remove jammed paper with both hands to avoid tearing it.
When jammed paper is torn and remains in the printer or
when paper is jammed in a place not mentioned in this
chapter, contact your dealer.
Make sure that the paper type that is loaded is the same as the
Paper Type setting in the printer driver.
Warning:
w
290

Troubleshooting

Be careful not to touch the fuser, which is marked CAUTION
HIGH TEMPERATURE, or the surrounding areas. If the
printer has been in use, the fuser and the surrounding areas
may be very hot.
Do not insert your hand deep into the fuser unit as some
components are sharp and may cause injury.