Checking The Connections Of Leads - Pioneer AVIC-8000NEX Operation Manual

Chapter
31 System settings
! After changing the installation position
of the navigation system
! After changing the installation angle of
the navigation system
! After moving the navigation system to
another vehicle
# If you touch [Reset Distance], all learned re-
sults stored in "Distance" are cleared.
Checking the connections
of leads
Check that the leads are properly connected
between this product and vehicle. Also check
whether they are connected in the correct po-
sitions.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The "System" screen appears.
3 Touch [System Information].
The following screen appears.
4 Touch [Connection Status].
The "Connection Status" screen appears.
160
En
1
2
3
4
5
6
7
1 GPS Antenna
Indicates the connection status of the GPS
antenna, the reception sensitivity, and from
how many satellites the signal is received.
Signal com- Used in posi-
Color
munication tioning
Orange Yes Yes
Yellow Yes No
p When the GPS antenna is connected to
this product, "OK" is displayed. When
the GPS antenna is not connected to
this product, "NOK" is displayed.
p If reception is poor, please change the
installation position of the GPS antenna.
2 Positioning Status
Displays the positioning status (3D posi-
tioning, 2D positioning, or no positioning),
the number of satellites used for position-
ing (orange), and the number of satellites
whose signal has been received (yellow). If
signals from more than three satellites are
received, the current location can be mea-
sured.
= For details, refer to Positioning technol-
ogy on page 203.
3 Installation