Restoring To Default Settings; Forgotten Password - Pioneer AVIC-8000NEX Operation Manual

Chapter
37 Other functions
8 Touch [Go].
A message indicating that the security setting
is canceled appears.

Forgotten password

Contact the nearest authorized Pioneer Ser-
vice Station.
Restoring this product to
the default settings
You can restore settings or recorded content
to the default settings. Various methods are
used to clear user data.
Method 1: Remove the vehicle battery
Resets various settings registered to this pro-
duct.
p The settings configured on the "Theme"
screen are not reset.
p The settings for iDatalink are not reset.
Method 2: Touch the item you want to
initialize on the "System" screen
= For details, refer to Restoring the default set-
tings on page 194.
Method 3: Press the RESET button
= For details of the operations, refer to Reset-
ting the microprocessor on page 11.
Restoring the default settings
Resets various settings registered to this pro-
duct to the default settings.
p This setting is available only when you stop
your vehicle in a safe place and apply the
parking brake.
CAUTION
Do not turn off the engine while restoring the set-
tings.
1 Press the HOME button to display the
Top menu screen.
194
En
2 Touch the following keys in the follow-
ing order.
The "System" screen appears.
3 Touch [Restore Settings].
The following screen appears.
4 Touch the item you want to initialize.
! All settings
! Audio settings
p This setting is available when the se-
lected source is "OFF".
! Video settings
p This setting is available when the se-
lected source is "Disc", "CD", "Video
CD" or "DVD".
! Theme settings
! Bluetooth Settings
A message confirming whether to initialize the
settings appears.
p If you want to return settings or recorded
content to the default, touch [All settings].
p Some of the settings configured on the
"Theme" setting will not be reset.
p The settings for iDatalink are not reset.
5 Touch [Restore].
When the selected item is successfully initia-
lized, a completion message appears.
p The source is turned off and the Bluetooth
connection is disconnected before the pro-
cess starts.