Customizing Preferences; The Options In The "Navi Settings" Menu; Displaying The "Navi Settings" Screen; Checking The Connections Of Leads - Pioneer AVIC-Z110BT Operation Manual

Chapter
13

Customizing preferences

The options in the "Navi
Settings" menu
Displaying the "Navi Settings"
screen
1 Press the HOME button to display the
"Top Menu".
2 Touch [Settings].
The "Settings Menu" screen appears.
3 Touch [Navi Settings].
The "Navi Settings" menu appears.

Checking the connections of leads

Check that leads are properly connected be-
tween the navigation system and the vehicle.
Please also check whether they are connected
in the correct positions.
Display the "Navi Settings" screen.
1
2 Touch [Connection Status].
The "GPS Status" screen appears.
1
2
3
4
5
6
1 Speed Pulse
The Speed Pulse value detected by the navi-
gation system is shown. "0" is shown while
the vehicle is stationary.
2 GPS ANT
94
En
Indicates the connection status of the GPS
antenna, the reception sensitivity, and from
how many satellites the signal is received.
Signal com-
Color
munication
Orange Yes
Yellow Yes
p When the GPS antenna is connected to
this navigation system, [OK] is dis-
played.
When the GPS antenna is not con-
nected to this navigation system, [NOK]
is displayed.
p If reception is poor, please change the
installation position of the GPS antenna.
3 Parking Brake
When the parking brake is applied, [On] is
displayed. When the parking brake is re-
leased, [Off] is displayed.
4 Power Voltage
The power voltage (reference value) pro-
vided from the vehicle battery to the naviga-
tion system is shown. If the voltage goes
out of the range from 11 V to 15 V, check
that power cable connection is correct.
5 Illumination
When the headlights or small lamps of a ve-
hicle are on, [On] is displayed. When the
small lamps of a vehicle are off, [Off] is dis-
played. (If the orange/white lead is not con-
nected, [Off] appears.)
6 Back Signal
When the gear lever is shifted to "R", the
signal switches to [High] or [Low]. (One of
these is displayed depending on the vehi-
cle.)
Checking sensor learning
status and driving status
p The navigation system can automatically
use its sensor memory based on the outer
dimensions of the tires.
Display the "Navi Settings" screen.
1
Used in posi-
tioning
Yes
No