Contents
9
Checking audio output
Outputs a TEST signal from the computer and checks the audio
output from the USB-DAC function.
q Select "Speakers" and click "Properties".
• The Speakers Properties window is displayed.
Front panel
Downloaded from
www.Manualslib.com
Connections
Playback
q
Display
Rear panel
manuals search engine
Settings
w Click the "Advanced" tab.
• Select the sampling rate and bit rate to be applied to the D/A
converter, and click "Apply".
e Click "Test".
• If the audio is output from the this unit, the setup is completed.
47
Remote
Appendix
Tips
w
e
Index