Using The Remote Control - LENCO DVP-722 Owner's Manual

Using the Remote Control

Installing the battery
1. Press the locking tab in the arrow direction.
(1)
(2)
2. Pull out the battery tray.
(3)
3. Insert a 3V lithium battery into the
tray with the polarity ( + ) facing up
as marked.
4. Replace the battery tray by pushing it
until it clicks into place.
(4)
Using the remote control
Point the remote control directly at the remote sensor
on the front of the DVD Player.
Remote Control Sensor
16:9 / 4:3 16:9 / 4:3 REVERSE REVERSE MODE MODE UP UP DOWN DOWN
E N T E R
5 5