Setting Audio Output - LENCO DVP-722 Owner's Manual

Setting Audio Output

1.Press SETUP on the remote control.
(
2.Use the direction keys
3.Press ENTER to confirm your selection.
4.Press SETUP to exit, or select EXIT SETUP to exit.
STANDBY MENU/PBC
DISPLAY MUTE P/N L/R
Changing AUDIO output
ANGLE LANGUAGE SUBTITLE TITLE
1 2 3 4
5 6 7 8
9 0 10+
SLOW
ENTER
SETUP
REPEAT MARK GOTO ZOOM
REMOTE CONTROL
MODEL No.:RMC-221
Note:
SPDIF/OFF:select this when you do not want to have digital
audio signal output.
SPDIF/RAW:select this when the digital audio output is
connected to an external amplifier with Dolby
Digital or DTS decoder which gives 5.1 channel
sound.
SPDIF/PCM:select this when the external amplifier has no
decoder.
)
to select AUDIO SETUP and its sub-menu.
AUDIO SETUP
AUDIO OUT SPDIF/OFF
SPDIF/RAW
EXIT SETUP
SPDIF/PCM
5 25