Removing The System Board; Prerequisites; Procedure - Dell Inspiron 14 5000 Series Service Manual

Hide thumbs Also See for Inspiron 14 5000 Series:
Table of Contents

Advertisement

Removing the System Board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You
must enter the Service Tag in the BIOS setup program after you replace
the system board.
NOTE: Replacing the system board removes any changes you have
made to the BIOS using the BIOS setup program. You must make the
desired changes again after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect them correctly
after you replace the system board.

Prerequisites

1
Remove the
2
Remove the battery.
3
Remove the
4
Remove the fan.
5
Remove the keyboard.
6
Remove the
7
Remove the
8
Remove the
9
Remove the

Procedure

1
Turn the computer over and open the display.
base
cover.
hard
drive.
base
frame.
memory
module(s).
wireless
card.
heat
sink.
Computer. After working inside your
After Working Inside Your
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents