Lighting Instructions - BBQ 122.20148510 Owner's Manual

Grill Lighting Instruction
Grill Lighting Instructions for Main Burners
1. Do not smoke while lighting grill or checking gas supply
connections.
2. Be sure that LP gas tank is sufficiently full.
WARNING
!
Failure to open grill lid during the lighting
procedure could result in a fire or explosion that
could cause serious bodily injury, death, or
property damage.
3. Be sure all gas connections are securely tightened.
4. Turn on gas supply.
5. Open the grill main lid.
6. Push and turn any main burner control knob to
/HIGH, at the same time, press and hold electronic
ignition button to light the burner. Once the burner is lit,
release the electronic ignition button and knob.
7. If the burner does not light after 5 seconds, turn knob
to OFF. Turn gas OFF at LP tank and wait 5 minutes
for gas to clear. Then turn gas ON at tank and repeat
step 6.
8. If burner still does not light, see Match Lighting section
and If Grill Still Fails to Light section on following page.
9. To light additional burners, turn burner knob(s) to
/HIGH . Push and hold electronic ignition button to
light burner. Adjust knob(s) to desired setting.
6
USING THE SIDE BURNER:
Inspect the gas supply hose prior to turning the gas
"ON". If there is evidence of cuts, wear or abrasion, it
must be replaced prior to use. Do not use the side
burner if the odor of gas is present. WARNING: Always
keep your face and body as far away from the
burner as possible when lighting.
LIGHTING INSTRUCTIONS FOR SIDE BURNER
1. Make sure the lid is open.
2. Push and slowly turn the Side Burner knob to
the same time, press and hold electronic ignition button to
light the burner. Once the burner is lit, release the
electronic ignition button and knob.
3. If burner does not light within 5 seconds, turn the knob to
OFF position and repeat the lighting procedure.
4. If burner fails to light after step 3, turn the knob to OFF
position, wait 5 minutes, then repeat the lighting procedure
or light by match.
/HIGH at