BBQ 122.20148510 Owner's Manual page 18

6. Firebox Assembly
NOTE: We suggest two persons lift the firebox when
assembling. Be sure to remove all packaging
material during assembly.
a) Remove the Firebox Assembly (C) from the
carton and carefully place onto the grill cart lid
handle will face front and be above front panel. As
shown in Fig. 13.
Loosen the screw which is pre-assembled in the
cart leg front , right (F).
Attach the gas hose to the fixture and fix the
screw which is loosen in above step.
b) Secure the firebox to the four cart leg by using
four1/4"x12mm black screws (AA) which are in the
hardware pack. As shown in Fig. 14.
c) Secure the firebox left to the cart beam by using two
1/4"x12mm black screws (AA) which are in the
hardware pack. As shown in Fig. 15.
18
Fig. 13.
C
F
Fig. 15.
Fig. 14.