Supero SUPERSERVER 1027R-WRF User Manual page 90

SUPERSERVER 1027R-WRF USER'S MANUAL
Super IO Confi guration
Super IO Chip: This item displays the Super IO chip used in the motherboard.
Serial Port 1 Confi guration
Serial Port
Select Enabled to enable a serial port specifi ed by the user. The options are
Enabled and Disabled.
Device Settings
This feature indicates whether or not a reset is required for a serial port specifi ed.
Change Settings
This option specifi es the base I/O port address and the Interrupt Request address
of Serial Port 1 and Serial Port 2. The options for Serial Port 1 are: Auto, IO=3F8h;
IRQ=4; IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 9,
10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; and IO=2E8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12.
Serial Port 2 Confi guration
Serial Port
Select Enabled to enable a serial port specifi ed by the user. The options are
Enabled and Disabled.
Device Settings
This item displays the settings of Serial Port 2.
Change Settings
This option specifi es the base I/O port address and the Interrupt Request address
of Serial Port 1 and Serial Port 2. The options for Serial Port 2 are: Auto, IO=2F8h;
IRQ=3; IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 9,
10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; and IO=2E8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12.
Serial Port 2 Attribute
Use this feature to select the attribute for serial port 2. The options are SOL (Serial
On LAN), and COM.
7-16