Connecting Up; Rear Panel Connections; Front Panel Connections - Pioneer DVD Recorder Operating Instructions Manual

Connecting up

02
Chapter 2
Connecting up

Rear panel connections

1 AC IN
Connect to a power outlet using the supplied power cable
after making all other connections.
2 Audio/video inputs 1 and 3
Two sets of audio/video inputs (stereo analog audio;
composite and S-video video) that you can use to connect
to satellite receivers, TVs, VCR or other source
component for recording.
3 Audio/video outputs 1 and 2
Two sets of audio/video outputs (stereo analog audio;
composite and S-video video) that you can use to connect
TVs or monitors.
4 COMPONENT VIDEO OUT
A high-quality video output for connecting to a TV or
monitor with a component video input.
5 ANTENNA IN (RF IN)/OUT
Connect your TV antenna to the ANTENNA IN (RF IN)
jack. The signal is passed through to the ANTENNA OUT
jack for connection to your TV.
6 OPTICAL DIGITAL OUT
A digital audio output for connecting to an AV amp/
receiver, Dolby Digital/DTS decoder or other equipment
with optical digital input.
7 CONTROL IN
Use to control this recorder from the remote sensor of
another Pioneer component with a CONTROL OUT
terminal and bearing the Pioneer
CONTROL OUT of the other component to the
CONTROL IN of this recorder using a mini-plug cord.
12
Downloaded From Disc-Player.com Pioneer Manuals
En
1
AC IN
CONTROL
mark. Connect the
2
INPUT 1/AUTO START REC
R L
IN OPTICAL
AUDIO VIDEO
S-VIDEO
DIGITAL OUT
INPUT 3
7 6

Front panel connections

On the right side of the front panel a flip-down cover
hides more connections.
8 DV IN
A DV input i.LINK connector, suitable for connecting a
DV camcorder.
9 Audio/video input 2
Audio/video input (stereo analog audio; composite and
S-video video), especially suitable for camcorders, game
consoles, portable audio, etc.
3 4 5
OUTPUT 1
Y P
B
R L
IN
ANTENNA
COMPONENT
VIDEO OUT
AUDIO VIDEO P
R
S-VIDEO
OUTPUT 2
VIDEO
DV IN S-VIDEO L(MONO) R
AUDIO
INPUT 2
8 9
OUT