Pioneer DVD Recorder Operating Instructions Manual page 37

Recording
• You can also use the
digits from the on-screen display.
2 After making the settings, select 'Enter' and
press ENTER.
The timer recording screen appears with the timer
program you just set.
3 Confirm that the settings are correct.
If the channel number isn't displayed, use the
buttons to highlight CH, then use the
the correct channel number.
• If the channel number is set, but incorrectly, set up
the guide channel (see G-Code CH Setting on
page 69).
4 Select 'Store Program' to finish.
• Other options in the same menu panel allow you to
name the program, and change the recording
destination and/or recording mode.
G-Code programming with the power off
You can enter a G-Code programming number when the
recorder is in standby.
Important
• You can't use this feature until you have set up the
guide channels. See G-Code CH Setting on page 69.
• You can't change the recording mode.
• You can't program daily or weekly timer recordings.
1 Press 'G-Code'.
The front panel display shows the current recording
mode and prompts you to enter the G-Code programming
number.
2 Use the number buttons to enter the number.
• To clear the last digit entered, press CLEAR.
Downloaded From Disc-Player.com Pioneer Manuals
buttons to select
buttons to set
HDD DVD
CH
G CLEAR
-CODE
+
CLEAR
ENTER
3 Press ENTER.
The display shows the timer settings:
Date Start time End time
Recording mode.
• If CODE ERROR appears in the display, check that
the number is correct and that the guide channel is
set (see G-Code CH Setting on page 69), then set the
timer recording again.
• If CAN'T SET appears in the display, it means that
although you entered a valid number, the program
has already finished.
Setting a manual timer recording
The timer recording screen you can see all the timer
programs already set, clear programs and set up new
ones.
ENTER
HOME
MENU
PREV NEXT
1 Press TIMER REC to display the Timer Recording
screen.
You can also access the Timer Recording screen from
the Home Menu (press HOME MENU, select Timer
Recording, then Timer Recording).
This screen shows all the timer programs currently set.
Timer Program View
SAT 26/03 15:00
Manhattan Open Tennis
SAT 26/03 18:00 – 19:00
World Journey
SUN 27/03 19:30 – 21:00
DVD Remain
• Each row is for one timer recording program, with the
date and time information, channel, recording mode,
and recording status.
Recording channel
CLEAR
CLEAR
TIMER REC
Tmr Pgms 2/32
OK
Pr 3
OK
Pr 4
New Input
0h30m(SP)
05
37
En