Table of Contents
Advertisement
RT601HS_WV_EN.book 19 ページ ２００５年８月３日 水曜日 午後３時３１分
WV_EN.book 17 ページ ２００５年８月３日 水曜日 午後３時３１分
Connecting other AV sources
Connecting an analog camcorder or a second
VCR
k 15 ページ ２００５年８月３日 水曜日 午後３時３１分
Connecting an external decoder box (2)
STANDBY/ON
f you only have a decoder, connect it to this recorder and your TV as shown on this page.
Using the setup on this page you can:
AUDIO/VIDEO
INPUT
• Record scrambled channels received using the recorder's built-in TV tuner.
２００５年８月３日 水曜日 午後３時３１分
1
ting to a cable box, satellite receiver or digital terrestrial receiver
Important
a cable, satellite or digital terrestrial receiver with a built-in decoder, connect it to this recorder and your TV
1
• Do not connect this recorder 'through' a VCR, satellite receiver or cable box. Always connect each component
n this page.
If you are using a separate decoder box for your cable/satellite TV, set up following the
directly to your TV or AV amplifier/receiver.
s on the next page.
etup on this page you can:
ons
AUDIO/VIDEO
any channel by selecting it on the cable box, satellite receiver or digital terrestrial receiver.
OUTPUT
elow is a basic setup that allows you to watch and record TV programs, and play discs. Other
channels and set timer recordings on the external receiver using the GUIDE Plus+
SCART AV
are explained starting on the following page.
™ cable, and after setting up).
1
Connect a set of audio and video outputs of your
CONNECTOR
VCR or camcorder to the front panel inputs of this
recorder.
portant
This enables you to record tapes from your camcorder or
g up
s use SCART cables (not supplied). If your TV does not have a SCART connection, see the
connect this recorder to your TV 'through' an external VCR, satellite receiver or other component. Always
second VCR.
connecting up using the supplied audio/video cable.
t each component directly to your TV or AV amplifier/receiver.
• You can't record the S-video input signal to VHS tape.
AV connector can output ordinary (composite), S-video or RGB video, plus stereo analog audio.
• This connection isn't necessary if you are using the
/DECODER) connector accepts ordinary, S-video and RGB video input, as well as stereo analog
HDD / DVD
HDD / DVD
COMPONENT
1
VIDEO OUT
Y
AV2(INPUT 1/DECODER) SCART connector for
AC IN
t on page 111 and AV2/L1 In on page 111 for how to set them up.
P
B
audio/video input and output (as explained in step 1).
P
R
ns
ANTENNA
changing any rear panel connections, make sure that all components are switched off and
IN (RF IN)
2
Connect a set of audio and video inputs of your
he wall outlet.
ellite/
2
camcorder or VCR to a set of outputs on this
rrestrial
recorder.
SCART AV
This enables you to record from this recorder to your
CONNECTOR
ANTENNA
HDD / DVD
HDD / DVD
camcorder or second VCR.
COMPONENT
IN
VIDEO OUT
• The S-VIDEO and COMPONENT video jacks output a
Y
SCART AV
CONNECTOR
video signal during HDD and DVD playback only. For
P
B
4
VHS playback, connect using the VIDEO OUT jack.
P
R
• Alternatively, you can use the AV2(INPUT 1/
HDD / DVD
HDD / DVD
3
COMPONENT
VIDEO OUT
VIDEO
DECODER) SCART connector for audio/video input
Y
OUT
HDD / DVD
AUDIO
S-VIDEO
DIGITAL
OUT
OUT
OUT
P
B
L
2
3
OPTICAL
CONTROL
G-LINK
and output with just one SCART cable.
P
R
R
AV 2 ( INPUT1/DECODER )
IN
HDD / DVD
HDD / DVD
COMPONENT
VIDEO OUT
VIDEO
AV 1 (RGB) - TV
Y
OUT
IN
HDD / DVD
AUDIO
S-VIDEO
DIGITAL
OUT
OUT
OUT
P
B
L
OPTICAL
ANTENNA
CONTROL
G-LINK
OUT
P
R
R
IN
Plugging in
1
After checking all the connections, plug in the recorder.
ents.
1
Use the supplied power cable to connect this
Antenna/cable TV
HDD/DVD only)
AV
wall outlet
recorder to a power outlet.
onnecting to a TV or
TOR
input.
TV
ct RF antenna cables as shown.
g audio outputs for
s you to watch and record TV channels.
er/receiver.
CART cable (not supplied) to connect the
ly)
TV AV connector to a SCART AV connector
onnecting to a TV or
V.
s you to watch discs.
ly)
Note
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
other SCART cable to connect the
necting to an AV
In order to use this setup, you will need to make the following settings from the Initial Setup menu:
T 1/DECODER) AV connector to a SCART AV
DTS/MPEG decoder or
• Set the AV2/L1 In setting to Decoder from the Initial Setup menu (see AV2/L1 In on page 111).
VHS
VHS AUTO
VHS/HDD/DVD
EJECT
PLAY
REC
COPY
INPUT2
COPY
COPY
VIDEO
L (MONO)
•
AUDIO
•
R
HDD/DVD
SELECT
S-VIDEO
VHS
HDD
DVD
Analog camcorder
Antenna/cable TV
wall outlet
VCR
Decoder
3
1
AV 2 ( INPUT1/DECODER )
4
Satellite dish/
VIDEO
AV 1 (RGB) - TV
OUT
jack.
antenna/cable TV
IN
HDD / DVD
AUDIO
S-VIDEO
DIGITAL
OUT
OUT
OUT
L
OPTICAL
ANTENNA
wall outlet
CONTROL
G-LINK
This enables you to control the tuner in the external
OUT
R
IN
ANTENNA
receiver using the GUIDE Plus+
OUT
Position the IR transmitter end of the G-LINK™ cable so
1
1
Connect the cable from the antenna/cable TV
that the IR receiver on your cable/satellite/digital
outlet to the ANTENNA IN (RF IN) jack on this
terrestrial receiver will pick up the control signals (see
1
recorder.
diagram).
3
2
Use another RF antenna cable to connect the
VIDEO
ANTENNA
OUT
HDD / DVD
IN
AUDIO
ANTENNA OUT of this recorder to the antenna input
S-VIDEO
DIGITAL
OUT
OUT
OUT
L
OPTICAL
on your TV.
CONTROL
G-LINK
R
AV 2 ( INPUT1/DECODER )
3
Use a SCART cable (not supplied) to connect the
IN
2
TV
AV 1 (RGB) - TV
IN
AV1(RGB)-TV AV connector on this recorder to the
ANTENNA
4
5
6
7
8
9
OUT
SCART AV connector on your TV.
9
AV2(INPUT 1/DECODER) AV connector
Tip
1
Audio/video input/output SCART-type AV connector for
• This recorder has a 'through' function which allows
connecting to another video component with a SCART
you to record a TV program from the built-in TV tuner
connector. The input accepts video, S-video and RGB.
in this recorder while watching a video playing on a
See the manual that came with your cable/satellite/
See AV2/L1 In on page 111 for how to set this up.
ANTENNA
separate video component. (To use this feature when
IN
digital terrestrial receiver if you're not sure where the IR
10 AV1(RGB)-TV AV connector
the recorder is in standby, Power Save must be set
receiver is on the front panel. Alternatively, experiment
Audio/video output SCART-type AV connector for
to Off —see Power Save on page 109).
with the remote control, operating it from very close
connecting to a TV or other equipment with a SCART
range until you find the place where the receiver
connector. The video output is switchable between video,
responds.
and RGB (though must be set to Video for VHS output).
See page AV1 Out on page 111 for how to set this up.
11 ANTENNA IN (RF IN)/OUT
• This recorder has a 'through' function which allows
Connect your TV antenna to the ANTENNA IN (RF IN)
jack. The signal is passed through to the ANTENNA OUT
jack for connection to your TV.
OPEN/
CLOSE
START
AUDIO/VIDEO
OUTPUT
2
1
Connect RF antenna cables as shown.
AUDIO/VIDEO
This enables you to watch and record TV channels.
INPUT
2
Use a SCART cable (not supplied) to connect the
AV1(RGB)-TV AV connector to a SCART AV connector
on your TV.
This enables you to watch discs.
3
Use another SCART cable to connect the
AV2(INPUT 1/DECODER) AV connector to a SCART AV
connector on your decoder box.
This enables you to record scrambled TV channels.
Plug the supplied G-LINK™ cable to the G-LINK™
1
AV 2 ( INPUT1/DECODER )
AV 1 (RGB) - TV
IN
/ DVD
/ DVD
ANTENNA
ONENT
O OUT
OUT
10
11
G-LINK cable
Tip
you to record a TV program from the built-in TV tuner
in this recorder while watching a video playing on a
separate video component. (To use this feature when
the recorder is in standby, Power Save must be set
1
02
®
system (via the
®
system.
AV 2 ( INPUT1/D
VIDEO
AV 1 (RGB) -
OUT
HDD / DVD
AUDIO
S-VIDEO
DIGITAL
OUT
OUT
OUT
L
OPTICAL
CONTROL
G-LINK
R
IN
En
Advertisement
Table of Contents
