Smeg SAP306 Instructions For The User page 37

Instructions for the User
10.7.1 Before starting the automatic cleaning cycle
Pyrolysis may be carried out at any time of the day or night (if you wish to
benefit from the lower cost of electricity overnight).
• Completely remove all accessories
from inside the oven.
• Remove the guide frames, see "10.6
Removing guide frames".
• At the end of the cleaning cycle, when
the oven has cooled down, reinsert
the frames by repeating the previously
used procedure in reverse order.
• Make sure that the oven door is firmly
closed.
Refer to the following diagram for setting the cleaning cycle duration:
CLEANING
DURATION
During the automatic cleaning cycle, the fans produce a more intense level of
noise due to a greater rotation speed; this is entirely normal and intended to
facilitate heat dissipation.
At the end of pyrolysis, the fans will continue to operate for long enough to avoid
overheating the walls of adjacent units and the front of the oven.
LIGHT DIRT
90 MIN.
MEDIUM DIRT
135 MIN.
HEAVY DIRT
180 MIN.
39