Electronic Analogue Clock - Smeg SAP306 Instructions For The User

Instructions for the User

7. ELECTRONIC ANALOGUE CLOCK

7.1 Operation of the electronic analogue clock in multifunction
models
7.1.1 Setting the time
When the oven is used for the first time, or after an interruption in the electricity
supply, the display flashes at regular intervals. Press
stop the display flashing and start the procedure for setting the correct time.
Press the value modification keys
by one minute for each pressure.
Press one of the two value modification keys until the current time appears. 6/7
seconds after the last key is pressed, the clock will start from the time set.
At the end of each completed programming operation, 8 beeps will sound 3/4
times at intervals of about 1 and a half minutes. This sequence can be stopped
at any time by pressing any key.
FUNCTION KEY LIST
TIMER BUTTON
END OF COOKING BUTTON
CLOCK ADJUSTMENT AND RESET
DECREASE VALUE BUTTON
INCREASE VALUE BUTTON
or to increase or decrease the setting
for 1 / 2 seconds to
17