Log Burner Kit Installation/Removal - Pacific energy BROADWAY Installation And Operating Instructions Manual

Air Deflector Installation / Removal
Installation
Position the air deflector in the fireplace as seen in
figure 34 and secure with two screws using a
screwdriver.
Removal
Remove the two screws seen in figure 34 using a
screwdriver, and remove the air deflector from
fireplace.
Burner Tray Installation / Removal
Installation
Place the burner tray in the fireplace and secure with
4 screws using a screwdriver, as seen in figure 35.
Removal
Remove the 4 screws seen in figure 35 using a
screwdriver, and remove the burner tray.
Burner Installation / Removal
Installation
Place burner in firebox so that the venturi is over top
of the orifice. To secure burner insert screw using a
screwdriver as seen in figure 36.
Removal
Remove screw seen in figure 36 and lift burner out of
the unit.
Log Burner Kit Installation / Removal
Figure 36:Burner
27
INSTALLER
INFORMATION
Figure 34: Air Deflector
Figure 35:Burner Tray
Figure 37:Burner Kit