Sharp LC-39LE650E Service Manual page 46

LC-39/50LE650
LC-39/50LE651
LC-39/50LE652
9. SMART LOADER
Description.
The Smartloader is a function implemented in the service software of SEE designed LE750 series intended to easily
replicate the user settings of one TV into another. These settings include (but not restricted to): picture and audio, tun-
ing set-up, language and country selection, PIN, child locked programs... Factory adjustments are not copied as they
are different for every TV.
The Smartloader makes possible the user data to be stored in a memory device connected to the USB terminal of the
TV that is used as reference and later load those data into other TVs by using their respective USB terminal.
How it works.
In reference TV:
1. Insert a memory device in the USB slot.
2. Enter in service mode, select SmartLoader (Clone TV) menu.
3. Press "OK".
4. Select "Save data" and press OK in the remote control.
5. Wait until "OK:0" is displayed, the file has been successfully created in the root directory of the memory device.
In case of error, an explanation message is shown.
In TV to be cloned:
1. Insert a memory device with a file in it obtained following the above procedure.
2. Enter in service mode, select SmartLoader menu.
3. Select "Load data" and press OK button in the remote control.
4. After some seconds, "OK: 0" is displayed. In case of error, an explanation message is shown.
5. Reboot the TV to load the new settings.
Very important: All the TVs must have the same software version and hardware.
46