Sharp LC-39LE650E Service Manual page 45

8. Public Mode (Hotel mode) ( continued )
10. INPUT TV MODE PROGRAM NUMBER [1-999]
If value is "0", TV should start in the last program number selected by user if in the previous control ATV / DTV
is selected, this is the normal user TV behavior. If value is different from "0", TV should starts in the specified
program number when it is switched on.
11. INPUT MODE FIXED [VARIABLE ↔ FIXED]
"FIXED" has been selected, any channels and input modes other than those selected at the start mode cannot
be picked up.
12. RC PATH THROUGH [ON ↔ OFF]
When ON and RS-232 circuitry is really assembled , in pin #9 of RS-232 socket appears a feedback of the
remote signal (3.3v logic type).
13. HOTEL MODE [ON ↔ OFF]
If ON has been selected the HOTEL MODE is activated.
14. RS-232C POWER ON [ENABLE ↔ DISABLE]
When this option is set to "ENABLE" it means that TV should be able to be switched on from standby mode
through a RS232 command.
15. HDMI LEVEL POWER ON [ENABLE ↔ DISABLE]
Enabling this option, the polling of HDMI signal presence in a given HDMI input is being monitored.
[TV in ON mode] If there isn't HDMI signal present, after some seconds TV should go to standby
[TV in standby mode] If there is HDMI signal present, TV should switch on.
16. COMMIT
Select Commit and press OK to apply the change.
17. RESET
Cancel all Public Mode settings. (It returns to the factory settings)
3
. Public Mode Menu.
Item
PUBLIC MODE
1 Power On fixed
2 Maximum volume
3 Volume fixed
4 Volume fixed level
5 RC button
6 Panel button
7 Menu Button
8 On Screen Display
9 Input mode start
10 Input TV mode program
number
11 Input mode fixed
12 RC path through
13 Hotel mode
14 RS232C Power On
15 HDMI Level Power On
16 Commit
17 Reset
(Need additional Hardware)
Description Remarks (adjustment details, etc.)
PUBLIC MODE Submenu Press ">" or "OK" to enter to PUBLIC MODE Submenu
Variable Press ";" or "<" to change Variable/Fixed then press "OK"
100 Enter number of maximum volume
Variable Press ";" or "<" to change Variable/Fixed then press "OK"
33 Enter number of maximum volume
Respond Press ";" or "<" to change Respond/No respond then press "OK"
Respond Press ";" or "<" to change Respond/No respond then press "OK"
Respond Press ";" or "<" to change Respond/No respond then press "OK"
Yes Press ";" or "<" to change Yes/No then press "OK"
Normal Press ";" or "<" to change Normal/ATV/DTV/HDMI1.. then press "OK"
0 Enter number of program
Variable Press ";" or "<" to change Variable/Fixed then press "OK"
Off Press ";" or "<" to change On/Off then press "OK" (Need additional Hardware)
Off Press ";" or "<" to change On/Off then press "OK"
Disable Press ";" or "<" to change Enable/Disable then press "OK" (Need additional
Hardware)
Disable Press ";" or "<" to change Enable/Disable then press "OK" (Need additional
Hardware)
Press "OK" to confirm
Press "OK" to return to factory settings
(Need additional Hardware)
(Need additional Hardware)
45
LC-39/50LE650
LC-39/50LE651
LC-39/50LE652