Update; Update Firmware - Pulse MV-374 User Manual

14.Update

In Update you can update the system's firmware to the new one or do the
factory reset to let the system back to default setting.

14.1 Update firmware

You can down load new firmware from here:
https://www.portech.com.tw/p3-HowtoupdateMV-374.asp
Please update firmware by to following steps.
14.1.1 MV-374
Need to update firmware for 3 times (Master, Slave1 and Slave2)
Step 1: MASTER: 192.168.0.100 please update this firmware
Step 2: Slave 1 : 192.168.0.100:8080 please update this firmware
Step 3: Slave 2 : 192.168.0.100:8180 please update this firmware
14.1.2 MV-378
Need to update firmware for 5 times (Master, Slave1, Slave2, Slave3,
and Slave4)
Step 1: MASTER: 192.168.0.100 please update this firmware
Step 2: Slave 1 : 192.168.0.100:8080 please update this firmware
Step 3: Slave 2 : 192.168.0.100:8180 please update this firmware
Step 4: Slave 3 : 192.168.0.100:8280 please update this firmware
Step 5: Slave 4 : 192.168.0.100:8380 please update this firmware
*Important *Important* After you *Important *Important * After you upgrade * After you * After you
*Important* Please *Important* Please do not do not change
*Important* Please *Important* Please do not do not
upgrade all the firmwares, please click Default Setting on 192.168.0.100 upgrade upgrade all the firmwares, please click Default Setting on 192.168.0.100 all the firmwares, please click Default Setting on 192.168.0.100 all the firmwares, please click Default Setting on 192.168.0.100
change firmware 's files firmware 's files name
change change firmware 's files firmware 's files
nat_portech_XXX
nat_portech_XXX
name. . . .
name name
-48-
Mv_4-8p_portech_XXX
Mv_4-8p_portech_XXX
Mv_4-8p_portech_XXX
Mv_4-8p_portech_XXX
Mv_4-8p_portech_XXX
Mv_4-8p_portech_XXX