Ports Setting - Pulse MV-374 User Manual

11.2 Ports Setting

In Ports Setting, you can change dialpeer port, SIP port, and RTP port.
Internal Dial Peer Port: default = 5060 (*important* this port number can't coincide
with SIP port or RTP port)
SIP port: default = ch1:5064 ch2:5066 ch3:5068...etc (*important* this port number
can't coincide with dialpeer port or RTP port)
You can only change the port number on Ch1, other Channels will be changed
automatically
RTP port: default = ch1:20004 ch2:20006 ch3:20008...etc (*important* this port
number can't coincide with dialpeer port or SIP port)
You can only change the port number on Ch1, other Channels will be changed
automatically
-35-